Deep Sea Electronics DSE4510

Technical specifications

Manufacturer

Deep Sea Electronics

Manufacturer part no.

DSE4510

Type

Auto start genset controller

Application

Genset controller

Used with

Diesel and gas generating sets

DC supply voltage, continuous

8 V to 35 V Continuous

Cranking dropouts

Able to survive 0 V for 50 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V

Maximum operating current

85 mA at 12 V, 96 mA at 24 V

Maximum standby current

51 mA at 12 V, 47 mA at 24 V

Maximum sleep current

35 mA at 12 V, 32 mA at 24 V

Maximum deep sleep current

<10 uA at 12 V, <10 uA at 24 V

Output A (fuel)

10 A short term, 5 A continuous, at supply voltage

Output B (start)

10 A short term, 5 A continuous, at supply voltage

Auxiliary outputs C & D

2 A DC at supply voltage

Generator voltage range

15 V to 415 V AC (Ph to N); 26 V to 719 V AC (Ph to Ph)

Generator frequency range

3.5 Hz to 75 Hz

Overall dimensions

140 mm x 113 mm x 43 mm

Panel cut-out

118 mm x 92 mm

Maximum panel thickness

8 mm

Storage temperature range

-40 °C to +85 °C

Operating temperature range

-30 °C to +70 °C; -40 °C to +70 °C (for heated display variant)

Technical documents (1)

• DSE data sheet DSE4510, DSE4520

Key features

• Compact 140 mm x 113 mm x 43 mm case
• Fuel and start outputs, 10 A short term, 5 A continuous
• Auxiliary outputs C and D rated 2 A DC
• Sleep and deep sleep modes
• Heated display variant down to -40 °C

About the Deep Sea Electronics DSE4510

The DSE4510 is the original (MKI) auto start module of DSE's compact DSE4510 and DSE4520 pair; the DSE4520 adds mains (utility) sensing and two more auxiliary outputs, E and F. DSE describes the pair as suitable for a wide variety of single gen-set applications. Its data sheet gives a 140 mm x 113 mm x 43 mm case for a 118 mm x 92 mm cut-out, fuel and start outputs rated 10 A short term and 5 A continuous, and a generator range of 15 V to 415 V AC (Ph to N). Deep Sea Electronics lists the DSE4510 as obsolete and names the DSE4520 MKII as its replacement; its notice 056-035 also names the DSEG4500.

What is the DSE4510 used for?

The DSE4510 starts, runs and stops a single generating set and protects the engine and alternator. Its sleep modes keep the current drawn from the battery low.

Lifecycle and successor

Discontinued.

OEM successor: DSE4520 MKII

Before you order

What to photograph or confirm so the right unit is quoted.

Check the model number DSE4510 on the module's label. Send us a photo of the label and we will confirm the details before quoting.