6ES7313-6CG04-0AB0
Siemens CPU 313C-2 DP compact CPU, 16 DI/16 DO, MPI and PROFIBUS DP
Image is for illustrative purposes only. Please refer to product description.
Delivery options
Siemens SIMATIC S7-300 CPU 313C-2 DP: compact CPU with MPI, 16 DI/16 DO, 3 high-speed counters (30 kHz), integrated PROFIBUS DP interface, 128 KB work memory, 24 V DC.
- Manufacturer
- Siemens
- Manufacturer part no.
- 6ES7313-6CG04-0AB0
- Product family
- SIMATIC S7-300 PLC Modules
- Type
- PLC CPU
- Lifecycle
- Discontinued: product cancellation (Siemens SiePortal), spare part only
- OEM successor
- Not stated
- Technical datasheet
- Data sheet
Technical specifications
- Manufacturer
- Siemens
- Manufacturer part no.
- 6ES7313-6CG04-0AB0
- Type
- PLC CPU
- Application
- PLC controller with integrated I/O
- Used with
- SIMATIC S7-300 rack (S7-300 backplane bus)
- Product type designation
- CPU 313C-2
- HW functional status
- 01
- Firmware version
- V3.3
- Engineering with / Programming package
- STEP 7 V5.5 + SP1 or higher or STEP 7 V5.3 + SP2 or higher with HSP 203
- Supply voltage / Rated value (DC)
- 24 V
- Supply voltage / permissible range, lower limit (DC)
- 19.2 V
- Supply voltage / permissible range, upper limit (DC)
- 28.8 V
- external protection for power supply lines (recommendation)
- Miniature circuit breaker, type C; min. 2 A; miniature circuit breaker type B, min. 4 A
- Mains buffering / Mains/voltage failure stored energy time
- 5 ms
- Mains buffering / Repeat rate, min.
- 1 s
- Load voltage L+ / Digital inputs / Rated value (DC)
- 24 V
- Load voltage L+ / Digital inputs / Reverse polarity protection
- Yes
- Load voltage L+ / Digital outputs / Rated value (DC)
- 24 V
- Load voltage L+ / Digital outputs / Reverse polarity protection
- No
- Input current / Current consumption (rated value)
- 800 mA
- Input current / Current consumption (in no-load operation), typ.
- 110 mA
- Input current / Inrush current, typ.
- 5 A
- Input current / I²t
- 0.7 A²·s
- Digital inputs / from load voltage L+ (without load), max.
- 80 mA
- Digital outputs / from load voltage L+, max.
- 50 mA
- Power loss, typ.
- 9 W
- Work memory / integrated
- 128 kbyte
- Work memory / expandable
- No
- Load memory / Plug-in (MMC)
- Yes
- Load memory / Plug-in (MMC), max.
- 8 Mbyte
Show all 332 specificationsShow fewer
- Load memory / Data management on MMC (after last programming), min.
- 10 a
- Backup / present
- Yes; Guaranteed by MMC (maintenance-free)
- Backup / without battery
- Yes; Program and data
- CPU processing times / for bit operations, typ.
- 0.07 µs
- CPU processing times / for word operations, typ.
- 0.15 µs
- CPU processing times / for fixed point arithmetic, typ.
- 0.2 µs
- CPU processing times / for floating point arithmetic, typ.
- 0.72 µs
- CPU-blocks / Number of elements (total)
- 1 024; (DBs, FCs, FBs); the maximum number of loadable blocks can be reduced by the MMC used.
- DB / Number, max.
- 1 024; Number range: 1 to 16000
- DB / Size, max.
- 64 kbyte
- FB / Number, max.
- 1 024; Number range: 0 to 7999
- FB / Size, max.
- 64 kbyte
- FC / Number, max.
- 1 024; Number range: 0 to 7999
- FC / Size, max.
- 64 kbyte
- OB / Number, max.
- see instruction list
- OB / Size, max.
- 64 kbyte
- OB / Number of free cycle OBs
- 1; OB 1
- OB / Number of time alarm OBs
- 1; OB 10
- OB / Number of delay alarm OBs
- 2; OB 20, 21
- OB / Number of cyclic interrupt OBs
- 4; OB 32, 33, 34, 35
- OB / Number of process alarm OBs
- 1; OB 40
- OB / Number of DPV1 alarm OBs
- 3; OB 55, 56, 57
- OB / Number of startup OBs
- 1; OB 100
- OB / Number of asynchronous error OBs
- 5; OB 80, 82, 85, 86, 87
- OB / Number of synchronous error OBs
- 2; OB 121, 122
- Nesting depth / per priority class
- 16
- Nesting depth / additional within an error OB
- 4
- S7 counter / Number
- 256
- S7 counter / Retentivity / adjustable
- Yes
- S7 counter / Retentivity / preset
- Z 0 to Z 7
- S7 counter / Counting range / lower limit
- 0
- S7 counter / Counting range / upper limit
- 999
- IEC counter / present
- Yes
- IEC counter / Type
- SFB
- IEC counter / Number
- Unlimited (limited only by RAM capacity)
- S7 timer / Number
- 256
- S7 timer / Retentivity / adjustable
- Yes
- S7 timer / Retentivity / preset
- No retentivity
- S7 timer / Time range / lower limit
- 10 ms
- S7 timer / Time range / upper limit
- 9 990 s
- IEC timer / present
- Yes
- IEC timer / Type
- SFB
- IEC timer / Number
- Unlimited (limited only by RAM capacity)
- Retentive data area (incl. timers, counters, flags), max.
- 64 kbyte
- Flag / Size, max.
- 256 byte
- Flag / Retentivity available
- Yes; MB 0 to MB 255
- Flag / Retentivity preset
- MB 0 to MB 15
- Flag / Number of clock memories
- 8; 1 memory byte
- Data blocks / Retentivity adjustable
- Yes; via non-retain property on DB
- Data blocks / Retentivity preset
- Yes
- Local data / per priority class, max.
- 32 kbyte; Max. 2048 bytes per block
- I/O address area / Inputs
- 2 048 byte
- I/O address area / Outputs
- 2 048 byte
- I/O address area / of which distributed / Inputs
- 2 030 byte
- I/O address area / of which distributed / Outputs
- 2 030 byte
- Process image / Inputs
- 2 048 byte
- Process image / Outputs
- 2 048 byte
- Process image / Inputs, adjustable
- 2 048 byte
- Process image / Outputs, adjustable
- 2 048 byte
- Process image / Inputs, default
- 128 byte
- Process image / Outputs, default
- 128 byte
- Digital channels / Inputs
- 16 256
- Digital channels / Inputs / of which central
- 1 008
- Digital channels / Outputs
- 16 256
- Digital channels / Outputs / of which central
- 1 008
- Analog channels / Inputs
- 1 015
- Analog channels / Inputs / of which central
- 248
- Analog channels / Outputs
- 1 015
- Analog channels / Outputs / of which central
- 248
- Hardware configuration / Number of expansion units, max.
- 3
- Number of DP masters / integrated
- 1
- Number of DP masters / via CP
- 4
- Number of operable FMs and CPs (recommended) / FM
- 8
- Number of operable FMs and CPs (recommended) / CP, PtP
- 8
- Number of operable FMs and CPs (recommended) / CP, LAN
- 6
- Rack / Racks, max.
- 4
- Rack / Modules per rack, max.
- 8; In rack 3 max. 7
- Clock / Hardware clock (real-time)
- Yes
- Clock / retentive and synchronizable
- Yes
- Clock / Backup time
- 6 wk; At 40 °C ambient temperature
- Clock / Deviation per day, max.
- 10 s; Typ.: 2 s
- Clock / Behavior of the clock following POWER-ON
- Clock continues running after POWER OFF
- Clock / Behavior of the clock following expiry of backup period
- the clock continues at the time of day it had when power was switched off
- Operating hours counter / Number
- 1
- Operating hours counter / Number/Number range
- 0
- Operating hours counter / Range of values
- 0 to 2^31 hours (when using SFC 101)
- Operating hours counter / Granularity
- 1 h
- Operating hours counter / retentive
- Yes; Must be restarted at each restart
- Clock synchronization / supported
- Yes
- Clock synchronization / to MPI, master
- Yes
- Clock synchronization / on MPI, device
- Yes
- Clock synchronization / to DP, master
- Yes; With DP slave only slave clock
- Clock synchronization / on DP, device
- Yes
- Clock synchronization / in AS, master
- Yes
- Clock synchronization / in AS, device
- No
- Number of digital inputs
- 16
- Number of digital inputs / of which inputs usable for technological functions
- 12
- Digital inputs / integrated channels (DI)
- 16
- Digital inputs / Input characteristic curve in accordance with IEC 61131, type 1
- Yes
- Number of simultaneously controllable inputs / horizontal installation / up to 40 °C, max.
- 16
- Number of simultaneously controllable inputs / horizontal installation / up to 60 °C, max.
- 8
- Number of simultaneously controllable inputs / vertical installation / up to 40 °C, max.
- 8
- Input voltage / Rated value (DC)
- 24 V
- Input voltage / for signal "0"
- -3 to +5V
- Input voltage / for signal "1"
- +15 to +30 V
- Input current / for signal "1", typ.
- 8 mA
- Input delay (for rated value of input voltage) / for standard inputs / parameterizable
- Yes; 0.1 / 0.3 / 3 / 15 ms (You can reconfigure the input delay of the standard inputs during program runtime. Please note that under certain circumstances your newly set filter time may not be effective until the next filter cycle.)
- Input delay (for rated value of input voltage) / for standard inputs / Rated value
- 3 ms
- Input delay (for rated value of input voltage) / for technological functions / at "0" to "1", max.
- 16 µs; Minimum pulse width/minimum pause between pulses at maximum counting frequency
- Digital inputs / Cable length / shielded, max.
- 1 000 m; 100 m for technological functions
- Digital inputs / Cable length / unshielded, max.
- 600 m; for technological functions: No
- Cable length / for technological functions / shielded, max.
- 100 m; at maximum count frequency
- Cable length / for technological functions / unshielded, max.
- not allowed
- Number of digital outputs
- 16
- Number of digital outputs / of which high-speed outputs
- 4; Notice: You cannot connect the fast outputs of your CPU in parallel
- Digital outputs / integrated channels (DO)
- 16
- Digital outputs / Short-circuit protection
- Yes; Clocked electronically
- Short-circuit protection / Response threshold, typ.
- 1 A
- Digital outputs / Limitation of inductive shutdown voltage to
- L+ (-48 V)
- Controlling a digital input
- Yes
- Switching capacity of the outputs / on lamp load, max.
- 5 W
- Load resistance range / lower limit
- 48 Ω
- Load resistance range / upper limit
- 4 kΩ
- Output voltage / for signal "1", min.
- L+ (-0.8 V)
- Output current / for signal "1" rated value
- 500 mA
- Output current / for signal "1" permissible range, min.
- 5 mA
- Output current / for signal "1" permissible range, max.
- 0.6 A
- Output current / for signal "1" minimum load current
- 5 mA
- Output current / for signal "0" residual current, max.
- 0.5 mA
- Parallel switching of two outputs / for uprating
- No
- Parallel switching of two outputs / for redundant control of a load
- Yes
- Switching frequency / with resistive load, max.
- 100 Hz
- Switching frequency / with inductive load, max.
- 0.5 Hz
- Switching frequency / on lamp load, max.
- 100 Hz
- Switching frequency / of the pulse outputs, with resistive load, max.
- 2.5 kHz
- Total current of the outputs (per group) / horizontal installation / up to 40 °C, max.
- 3 A
- Total current of the outputs (per group) / horizontal installation / up to 60 °C, max.
- 2 A
- Total current of the outputs (per group) / vertical installation / up to 40 °C, max.
- 2 A
- Digital outputs / Cable length / shielded, max.
- 1 000 m
- Digital outputs / Cable length / unshielded, max.
- 600 m
- Number of analog inputs
- 0
- Analog inputs / integrated channels (AI)
- 0
- Analog outputs / integrated channels (AO)
- 0
- Connectable encoders / 2-wire sensor
- Yes
- Connectable encoders / 2-wire sensor / permissible quiescent current (2-wire sensor), max.
- 1.5 mA
- Number of PROFINET interfaces
- 0
- Number of RS 485 interfaces
- 2; MPI and PROFIBUS DP
- Number of RS 422 interfaces
- 0
- 1. Interface / Interface type
- Integrated RS 485 interface
- 1. Interface / Isolated
- No
- Interface types / RS 485
- Yes
- Interface types / Output current of the interface, max.
- 200 mA
- 1. Interface / Protocols / MPI
- Yes
- 1. Interface / Protocols / PROFIBUS DP master
- No
- 1. Interface / Protocols / PROFIBUS DP device
- No
- Protocols / Point-to-point connection
- No
- MPI / Transmission rate, max.
- 187.5 kbit/s
- MPI / Services / PG/OP communication
- Yes
- MPI / Services / Routing
- Yes
- MPI / Services / Global data communication
- Yes
- MPI / Services / S7 basic communication
- Yes
- MPI / Services / S7 communication
- Yes; Only server, configured on one side
- MPI / Services / S7 communication, as client
- No; but via CP and loadable FB
- MPI / Services / S7 communication, as server
- Yes
- 2. Interface / Interface type
- Integrated RS 485 interface
- 2. Interface / Isolated
- Yes
- 2. Interface / Protocols / MPI
- No
- Protocols / PROFINET IO Controller
- No
- Protocols / PROFINET IO Device
- No
- Protocols / PROFINET CBA
- No
- 2. Interface / Protocols / PROFIBUS DP master
- Yes
- 2. Interface / Protocols / PROFIBUS DP device
- Yes
- PROFIBUS DP master / Transmission rate, max.
- 12 Mbit/s
- PROFIBUS DP master / max. number of DP devices
- 124
- PROFIBUS DP master / Services / PG/OP communication
- Yes
- PROFIBUS DP master / Services / Routing
- Yes
- PROFIBUS DP master / Services / Global data communication
- No
- PROFIBUS DP master / Services / S7 basic communication
- Yes; I blocks only
- PROFIBUS DP master / Services / S7 communication
- Yes; Yes (only server; connection configured at one end)
- PROFIBUS DP master / Services / S7 communication, as client
- No
- PROFIBUS DP master / Services / S7 communication, as server
- Yes
- PROFIBUS DP master / Services / Equidistance
- Yes
- PROFIBUS DP master / Services / Isochronous mode
- No
- PROFIBUS DP master / Services / SYNC/FREEZE
- Yes
- PROFIBUS DP master / Services / activation/deactivation of DP devices
- Yes
- PROFIBUS DP master / Services / max. number of DP devices that can be activated/deactivated at the same time
- 8
- PROFIBUS DP master / Services / Direct data exchange (slave-to-slave communication)
- Yes; as subscriber
- PROFIBUS DP master / Services / DPV1
- Yes
- PROFIBUS DP master / Address area / Inputs, max.
- 2 kbyte
- PROFIBUS DP master / Address area / Outputs, max.
- 2 kbyte
- PROFIBUS DP master / User data per DP device / Inputs, max.
- 244 byte
- PROFIBUS DP master / User data per DP device / Outputs, max.
- 244 byte
- PROFIBUS DP device / Transmission rate, max.
- 12 Mbit/s
- PROFIBUS DP device / automatic baud rate search
- Yes; only with passive interface
- PROFIBUS DP device / Address area, max.
- 32
- PROFIBUS DP device / User data per address area, max.
- 32 byte
- PROFIBUS DP device / Services / PG/OP communication
- Yes
- PROFIBUS DP device / Services / Routing
- Yes; Only with active interface
- PROFIBUS DP device / Services / Global data communication
- No
- PROFIBUS DP device / Services / S7 basic communication
- No
- PROFIBUS DP device / Services / S7 communication
- Yes; Yes (only server; connection configured at one end)
- PROFIBUS DP device / Services / S7 communication, as client
- No
- PROFIBUS DP device / Services / S7 communication, as server
- Yes
- PROFIBUS DP device / Services / Direct data exchange (slave-to-slave communication)
- Yes
- PROFIBUS DP device / Services / DPV1
- No
- PROFIBUS DP device / Transfer memory / Inputs
- 244 byte
- PROFIBUS DP device / Transfer memory / Outputs
- 244 byte
- Protocols / PROFIsafe
- No
- PG/OP communication
- Yes
- Communication functions / Data record routing
- Yes
- Global data communication / supported
- Yes
- Global data communication / Number of GD loops, max.
- 8
- Global data communication / Number of GD packets, max.
- 8
- Global data communication / Number of GD packets, transmitter, max.
- 8
- Global data communication / Number of GD packets, receiver, max.
- 8
- Global data communication / Size of GD packets, max.
- 22 byte
- Global data communication / Size of GD packet (of which consistent), max.
- 22 byte
- S7 basic communication / supported
- Yes
- S7 basic communication / User data per job, max.
- 76 byte
- S7 basic communication / User data per job (of which consistent), max.
- 76 byte; 76 bytes (with X_SEND or X_RCV); 64 bytes (with X_PUT or X_GET as server)
- S7 communication / supported
- Yes
- S7 communication / as server
- Yes
- S7 communication / as client
- Yes; Via CP and loadable FB
- S7 communication / User data per job, max.
- 180 kbyte; With PUT/GET
- S7 communication / User data per job (of which consistent), max.
- 240 byte; as server
- S5 compatible communication / supported
- Yes; via CP and loadable FC
- Number of connections / overall
- 8
- Number of connections / usable for PG communication
- 7
- Number of connections / usable for PG communication / reserved for PG communication
- 1
- Number of connections / usable for PG communication / adjustable for PG communication, min.
- 1
- Number of connections / usable for PG communication / adjustable for PG communication, max.
- 7
- Number of connections / usable for OP communication
- 7
- Number of connections / usable for OP communication / reserved for OP communication
- 1
- Number of connections / usable for OP communication / adjustable for OP communication, min.
- 1
- Number of connections / usable for OP communication / adjustable for OP communication, max.
- 7
- Number of connections / usable for S7 basic communication
- 4
- Number of connections / usable for S7 basic communication / reserved for S7 basic communication
- 0
- Number of connections / usable for S7 basic communication / adjustable for S7 basic communication, min.
- 0
- Number of connections / usable for S7 basic communication / adjustable for S7 basic communication, max.
- 4
- Number of connections / usable for routing
- 4; max.
- S7 message functions / Number of login stations for message functions, max.
- 8; Depending on the configured connections for PG/OP and S7 basic communication
- S7 message functions / Process diagnostic messages
- Yes
- S7 message functions / simultaneously active Alarm_S blocks, max.
- 300
- Test commissioning functions / Status block
- Yes; Up to 2 simultaneously
- Test commissioning functions / Single step
- Yes
- Test commissioning functions / Number of breakpoints
- 4
- Status/control / Status/control variable
- Yes
- Status/control / Variables
- Inputs, outputs, memory bits, DB, times, counters
- Status/control / Number of variables, max.
- 30
- Status/control / Number of variables, max. / of which status variables, max.
- 30
- Status/control / Number of variables, max. / of which control variables, max.
- 14
- Forcing / Forcing
- Yes
- Forcing / Forcing, variables
- Inputs, outputs
- Forcing / Number of variables, max.
- 10
- Diagnostic buffer / present
- Yes
- Diagnostic buffer / Number of entries, max.
- 500
- Diagnostic buffer / Number of entries, max. / can be set
- No
- Diagnostic buffer / Number of entries, max. / of which powerfail-proof
- 100; Only the last 100 entries are retained
- Diagnostic buffer / Number of entries readable in RUN, max.
- 499
- Diagnostic buffer / Number of entries readable in RUN, max. / can be set
- Yes; From 10 to 499
- Diagnostic buffer / Number of entries readable in RUN, max. / preset
- 10
- Service data / Can be read out
- Yes
- Diagnostics indication LED / Status indicator digital input (green)
- Yes
- Diagnostics indication LED / Status indicator digital output (green)
- Yes
- Counter / Number of counters
- 3; See "Technological Functions" manual
- Counter / Counting frequency, max.
- 30 kHz
- Integrated Functions / Frequency measurement
- Yes
- Frequency measurement / Number of frequency meters
- 3; up to 30 kHz (see "Technological Functions" manual)
- Integrated Functions / controlled positioning
- No
- integrated function blocks (closed-loop control)
- Yes; PID controller (see "Technological Functions" manual)
- Integrated Functions / PID controller
- Yes
- Integrated Functions / Number of pulse outputs
- 3; Pulse width modulation up to 2.5 kHz (see "Technological Functions" Manual)
- Integrated Functions / Limit frequency (pulse)
- 2.5 kHz
- Potential separation digital inputs / Potential separation digital inputs
- Yes
- Potential separation digital inputs / between the channels
- No
- Potential separation digital inputs / between the channels and backplane bus
- Yes
- Potential separation digital outputs / Potential separation digital outputs
- Yes
- Potential separation digital outputs / between the channels
- Yes
- Potential separation digital outputs / between the channels, in groups of
- 8
- Potential separation digital outputs / between the channels and backplane bus
- Yes
- Isolation tested with
- 600 V DC
- Ambient temperature during operation / min.
- 0 °C
- Ambient temperature during operation / max.
- 60 °C
- Configuration software / STEP 7
- Yes; STEP 7 V5.5 + SP1 or higher or STEP 7 V5.3 + SP2 or higher with HSP 203
- Configuration software / STEP 7 Lite
- No
- Programming / Command set
- see instruction list
- Programming / Nesting levels
- 8
- Programming / System functions (SFC)
- see instruction list
- Programming / System function blocks (SFB)
- see instruction list
- Programming / Programming language / LAD
- Yes
- Programming / Programming language / FBD
- Yes
- Programming / Programming language / STL
- Yes
- Programming / Programming language / SCL
- Yes
- Programming / Programming language / CFC
- Yes
- Programming / Programming language / GRAPH
- Yes
- Programming / Programming language / HiGraph®
- Yes
- Know-how protection / User program protection/password protection
- Yes
- Know-how protection / Block encryption
- Yes; With S7 block Privacy
- Width
- 80 mm
- Height
- 125 mm
- Depth
- 130 mm
- Weight, approx.
- 500 g
Technical documents (1)
Key features
- 128 KB integrated work memory
- Integrated I/O: 16 DI and 16 DO
- 3 high-speed counters (30 kHz)
- MPI and PROFIBUS DP interfaces
- Needs one 40-pole front connector and a Micro Memory Card
- Discontinued by Siemens on 1 October 2025; spare part only
About the Siemens 6ES7313-6CG04-0AB0
The Siemens 6ES7313-6CG04-0AB0 is the CPU 313C-2 DP, a compact S7-300 CPU with digital I/O on board. Siemens's data sheet lists 128 KB of work memory, 16 digital inputs and 16 digital outputs, three high-speed counters up to 30 kHz, and two RS 485 interfaces for MPI and PROFIBUS DP, on 24 V DC. It needs one 40-pole front connector and a Micro Memory Card, ordered separately. Siemens's data sheet marks it as a spare part. Siemens names no direct successor for the order number; its route forward is migration to the S7-1500 with ET 200MP.
What is the 6ES7313-6CG04-0AB0 used for?
It runs small machines on its own digital I/O and links PROFIBUS DP devices such as drives and remote I/O. A failed 313C-2 DP takes its own I/O down with it.
Lifecycle and successor
Discontinued: product cancellation (Siemens SiePortal), spare part only.
Before you order
What to photograph or confirm so the right unit is quoted.
Check the full order number and the firmware version on the CPU's label, and read the program size from the project if you can: a replacement must match or exceed the work memory. The Micro Memory Card (MMC) holding the program is a separate part; send its order number and size too. The front connector carries the field wiring and can usually be moved to the replacement unit.
Alternatives for 6ES7313-6CG04-0AB0
The manufacturer’s named successor and other parts in the same family. None is a drop-in replacement without checking wiring, I/O and configuration for your installation.
| Product | Manufacturer | Type | Lifecycle | Relationship | Qty Available | Price | Action |
|---|---|---|---|---|---|---|---|
| Siemens 6ES7315-2AH14-0AB0CPU 315-2 DP, 256 KB, MPI and PROFIBUS DP | Siemens | PLC CPU | Discontinued: product cancellation (Siemens SiePortal), spare part only | Same family | On Request | On request | View › |
| Siemens 6ES7315-2EH14-0AB0CPU 315-2 PN/DP, 384 KB, MPI/DP and PROFINET | Siemens | PLC CPU | Discontinued: product cancellation (Siemens SiePortal), spare part only | Same family | On Request | On request | View › |
| Siemens 6ES7317-2EK14-0AB0CPU 317-2 PN/DP, 1 MB, MPI/DP and PROFINET | Siemens | PLC CPU | Discontinued: product cancellation (Siemens SiePortal), spare part only | Same family | On Request | On request | View › |
| Siemens 6ES7314-6EH04-0AB0CPU 314C-2 PN/DP compact CPU with integrated I/O | Siemens | PLC CPU | Discontinued: product cancellation (Siemens SiePortal), spare part only | Same family | On Request | On request | View › |
| Siemens 6ES7313-5BG04-0AB0CPU 313C compact CPU with integrated I/O, MPI | Siemens | PLC CPU | Discontinued: product cancellation (Siemens SiePortal), spare part only | Same family | On Request | On request | View › |
| Siemens 6ES7321-1BL00-0AA0SM 321 digital input, 32 DI, 24 V DC | Siemens | Digital input module | Discontinued: product cancellation (Siemens SiePortal), spare part only | Same family | On Request | On request | View › |
| Siemens 6ES7322-1BL00-0AA0SM 322 digital output, 32 DO, 24 V DC, 0.5 A | Siemens | Digital output module | Discontinued: product cancellation (Siemens SiePortal), spare part only | Same family | On Request | On request | View › |
| Siemens 6ES7331-7KF02-0AB0SM 331 analog input, 8 AI, U/I/thermocouple/resistance | Siemens | Analog input module | Discontinued: product cancellation (Siemens SiePortal), spare part only | Same family | On Request | On request | View › |
| Siemens 6ES7332-5HF00-0AB0SM 332 analog output, 8 AO, voltage/current | Siemens | Analog output module | Discontinued: product cancellation (Siemens SiePortal), spare part only | Same family | On Request | On request | View › |
| Siemens 6ES7307-1EA01-0AA0PS307 power supply, 120/230 V AC in, 24 V DC 5 A out | Siemens | Power supply | Phase-out announced (Siemens SiePortal) | Same family | On Request | On request | View › |
| Siemens 6GK7343-1CX10-0XE0CP 343-1 Lean communications processor, Industrial Ethernet | Siemens | Communications processor | Discontinued: product cancellation (Siemens SiePortal), spare part only | Same family | On Request | On request | View › |
| Siemens 6GK7343-1EX30-0XE0CP 343-1 communications processor, Industrial Ethernet, PROFINET IO controller | Siemens | Communications processor | Discontinued: product cancellation (Siemens SiePortal), spare part only | Same family | On Request | On request | View › |
You may also be interested in
Siemens
Siemens 6ES7972-0BA12-0XA0
View ›
Siemens
Siemens 6ES7972-0BB12-0XA0
View ›
Siemens
Siemens 6ES7972-0BA42-0XA0
View ›
Siemens
Siemens 6ES7972-0BB42-0XA0
View ›
Siemens
Siemens 6ES7972-0BA52-0XA0
View ›
Siemens
Siemens 6ES7972-0BB52-0XA0
View ›
Siemens
Siemens 6ES7972-0BA61-0XA0
View ›
Siemens
Siemens 6ES7972-0BA70-0XA0
View ›
Siemens
Siemens 6GK1500-0FC10
View ›
Siemens
Siemens 6GK1901-1BB10-2AA0
View ›
Siemens
Siemens 6GK1901-1BB11-2AA0
View ›
Siemens
Siemens 6XV1830-0EH10
View ›
TIMC is an independent distributor. Manufacturer names and logos are the property of their respective owners and identify products we source; they do not imply manufacturer authorization or affiliation.